Generation 3 Load Management System (Gen3-LMS)

Gen3-LMS Worksafe Awards
Gen3-LMS Worksafe Awards Winner 2012
Gen3-LMS on HTL4010
Gen3-LMS installed on a Haulotte HTL4010
Gen3-LMS on MT732 & MLT741
Gen3-LMS installed on a Manitou MT732 and MLT741
Gen3-LMS Main Screen
Main Screen of the Gen3-LMS
Gen3-LMS on 541.70
Gen3-LMS installed on a JCB Loadall 541.70
Gen3-LMS on ARM6T36-E
Gen3-LMS installed on a OmegaLift ARM6T36-E

The EQSS Gen3-LMS is a load management system designed in Australia for use with telescopic handlers.

It features an on screen rating chart for each attachment. The rating chart is colour shaded depending on the weight of the load. Allowing the telehandler operator to easily see how far the boom can be extended just by lifting the load.

The Gen3-LMS displays the stability triangle of the telehandler. Cross-hairs mark the centre of gravity within the stability triangle. When lifting a load while on a lateral side slope the Gen3-LMS will warn the operator if the boom is raised too high, preventing the telehandler from tipping over the side.

The 7 inch wide screen sunlight readable colour display comes integrated with a reversing camera as standard, as well as a front blind side camera to show past the boom and an optional remote camera mounted on the top of the boom to allow the operator a view of the load with a press of a button.

The Gen3-LMS is a Rated Capacity Limiter (RCL) which when installed with the existing Longitudinal Moment Indicator (LMI) makes the telehandler fully compliant to AS1418.19

For more information on the Gen3-LMS click here


111019 screen thumb


Telehandler Load Management System

The Gen3 LMS is our third generation load management system for telehandlers. It allows the operator to work with the rated capacity of the attachment. It shows the operator the current postition within the rating chart on the 7 inch colour screen. It also comes equiped with a reverse camera.

More Info


Crush Guard

Crush Guard®

Secondary Guarding Solution for EWP

The EQSS Model 6252 Crush Guard® is a secondary guard solution for EWPs, which utilises a pressure sensitive trigger spanning across the operator controls.

More Info


screen housing 120709 thumb


Radius/Height Limiter for Elevated Work Platforms

The safe flight pattern limiter restricts the elevated work platform to operate only within the safe working area. It also prevents operation if the carrier is not level.

More Info


DSC 0939c


Large Numerical Multi Purpose Load Display

The CLND is a large numerical display for industrial weighting systems. When connected into any load sensor it displays the load with an accuracy of 1 Kg via four 2.25" LED digits. Allowing the operator and others around the machine easy access to the loading values. Suitable for truck mounted cranes, maximum load limiting and lifting applications to meet mine spec requirements.

More Info


DSC 0775c2


Dual Axes Inclinometer for Man Platform

The CDIM uses a digital inclinometer with an accuracy of 0.1 degrees to measure the pitch and yaw of the attached carrier. Suitable for small drivable man platforms. It uses an audible alarm to alert the operator when getting close to the angle limit.

More Info